Electric Immersion Baptistry Water Heater

When you partner with Little Giant Manufacturing, safe, efficient baptistery heating has never been easier. Our company is over a century old, and our loyal customers have come to expect the best in affordable pricing, product quality, and premium warranties. Little Giant heaters are designed with Incoloy alloy stainless steel immersion water heater tanks, and heat is confined to the formed horizontal section for optimum efficiency. In addition, each cold riser extends to the container top—where unit controls are housed.  

Available in 240V- and 120V-designs, Little Giant’s premium electric immersion baptistery heaters come with a range of standard and optional features. They include:

  • Three-conductor cord sets with polarized plugs
  • Pre-wiring for easy installation
  • Stainless steel, easy-mount brackets
  • 125° high-limit switches
  • Money-saving, on-off pilot light switches
  • Adjustable, vapor-proof thermostat controls (available temps of -55°F to 115°F)
  • Flexible, 60-inch power cords
  • Stationary, easy-to-use cleaning modes

Portable and simple to install in the middle, side, or end of your baptistery, Little Giant immersion water heater units are ready to use upon arrival. In addition, heating installation does not require cutting or damaging of your current baptistery or container.

When you need an economical, dependable heating option for your church or facility’s baptistery tub, Little Giant immersion units are UL-listed and perfect for fast heat-up in your baptistry. Call our team of experts today to inquire about steeple, baptistery or heater pricing, or to discuss the installation of your new heating unit.

Electric Immersion Water Heater 240 Volts

Model SS-6-42HLModel 6HI-HL-240(SS6-42-HL)
240 Volts Single Phase
Especially Designed For Easy, Low Cost Installation

Application

The 6HI-HL-240 unit is ideally engineered for heating permanent or portable baptistries of all types.  For use in fiberglass, concrete, vinyl, or any design of baptistry. 

Construction Features

  • Immersion section of unit made of Incoloy or Stainless Steel, and are bright annealed.
  • All heat confined to the formed horizontal section for optimum heat efficiency.
  • Cold riser extends to the top of container where control housing is located.
  • 3-Conductor cord set with polarized plug included for easy installation and wiring at no extra charge.
  • Adjustable vapor-proof thermostat control with temperature range off - 55°F to 115°F (± 3°).
  • Hi-Limit cut out switch set at 125°F (±4°).
  • Stainless steel mounting bracket also supplied for easy mounting.
  • Pilot light and on-off switch provided, indicates desired temperature when reached and breaks circuit when element is not in use. Saves electricity - Saves money.

 

Notes

  • Completely automatic and portable - just plug in the 60" Power Cord and operate.
  • No cutting or damage to your present container.
  • Although portable - your container may be cleaned without removing unit.
  • Unit can be suspended in middle, end or side of container.
  • No contractors required on standard 6HI-HL-240(SS6-42HL) Models
  • The 6HI-HL-240 (6KW) will heat 60 GPH (40° R). A 750 to 1,000 gallon Baptistry can be heated in 13 to 17 hours, or one-half this time 20 degree rise in temperature.
  • Heater can be operated on 120 volts, but the wattage power will be reduced to 1500 watts but will only heat 15 GPH (40°R) or 30 GPH (20°R).

UL Listed under File # E234452


Model SS6-42HL [Part No. 6HI-HL] - List Price $410.00
Receptacle [Part No. SR] - List Price $45.00

We now have inline GFCI's for the 240volt Immersion Heater In Stock.

   240 Volt GFCI  [Part #: GFCI-240]      $60.00

 

 

Electric Immersion Water Heater 120 Volts

Electric Immersion 120vModel # 6HI-HL-120
120 Volts Single Phase
Especially Designed For Easy, Low Cost Installation

Application

Construction Features

  • Immersion section of unit made of Incoloy Stainless Steel.
  • All heat confined to the formed horizontal section for optimum heat efficiency.
  • Cold riser extends to the top of container where control housing is located.
  • 3-Conductor cord set with polarized plug included for easy installation and wiring at no extra charge.
  • Adjustable vapor-proof thermostat control with temperature range off - 55°F to 115°F (± 3°).
  • Hi-Limit cut out switch set at 125°F (±4°).
  • Stainless steel mounting bracket also supplied for easy mounting.
  • Pilot light and on-off switch provided, indicates desired temperature when reached and breaks circuit when element is not in use. Saves electricity - Saves money.

Notes

  • Completely automatic and portable - just plug in the 60" Power Cord and operate.
  • No cutting or damage to your present container.
  • Although portable - your container may be cleaned without removing unit.
  • Unit can be suspended in middle, end or side of container.
  • No contractors required for ease of installation.
  • The 6HI-HL-120 (1.5KW) will heat 20 GPH (40° R). A 100 to 200 gallon Baptistry can be heated in 5 to 10 hours, or one-half this time for 20 degree rise in temperature.
  • Heater must be used with a GFCI to comply with NEC codes.

UL Listed under File # E234452


Model [Part No. 6HI-HL-120] - List Price $410.00

**Now offering an inline GFCI for the 120volt Immersion heater**

120volt GFCI [Part #: GFCI-120]   $35.00

Contact one of our qualified representatives today to discuss options and pricing
or to order from the number-one fiberglass church manufacturer in the U.S. call us today at 1-800-231-6035


Internet marketing and web development
by TopSpot Internet Marketing