Carpet Cleaning Industry
Hotomatic® Gas Water Heaters Produce Instantaneous
Hot Water for Equipment Used in Carpet Cleaning,
as well as all other Washing Equipment.
Models 2HT, 3HT, and 4HT Hotomatic® Gas Water Heaters are designed specifically for heating water under pressure - perfect for carpet cleaning.
The high capacity thermostat is located in the top coil header. The cold water inlet is also connected in the top header above the thermostat's temperature sensing probe. The heater's main burner ignites immediately when water is turned on at the wand. When the water is turned off at the wand the thermostat reacts quickly and turns off when the water reaches the temperature set on its dial. This prompt thermostat action prevents the buildup of very hot water in the wand hose. Tests in our laboratory show a maximum output hot water temperature of 200°F when the thermostat was set on 180°F; and a maximum of 180°F when the thermostat was set on 160°F. This close control of the maximum water temperature is very important.
- Extreme water temperatures in the hose reduces its bursting pressure rating. Bursting of a hose by 250°F water at 450 PSI pressure is very dangerous.
- Extreme water temperature at high pressure will burst into live steam when released through the wand to atmospheric pressure. Live steam will not clean as well as hot water 180° - 200°F. The live steam is also capable of harming the carpet and backing.
Model #2HT SQ
Hotomatic® Cart System
List Price $1,325.00
- 65,000 BTU/Hr. Input
- Heats:
90 GPH (60°R) = 1.5 GPM (60°R)
54 GPH (100°R) = .9 GPM (100°R)
- Rugged Welded Steel Frame
- 20# Tank Size 12" X 14"
with Fuel Gauge and Relief Valve
Holds 5 Gallons of LP Gas
Operating Time Approx. 7-1/2 Hrs.
Model #3HT SQ
Hotomatic® Cart System
List Price $1,650.00
- 120,000 BTU/Hr. Input
- Heats:
150 GPH (60°R) = 2.5 GPM (60°R)
90 GPH (100°R) = 1.5 GPM (100°R)
- 40# Tank Size 12" X 28"
with Fuel Gauge and Relief Valve
Holds 10 Gallons of LP Gas
Operating Time Approx. 7-1/2 Hrs.